Rotovators have the big advantage that they don't have as much force on them as a full space elevator and thus can be constructed without such incredibly strong materials. The big downside is that since they are freestanding objects they only act as momentum storage. As they boost things their orbit decays; if you don't want it destroyed, you have to use it to slow things down also.

At first glance this means they're not of much use until we have extraterrestrial mining to provide mass to be deorbited. However, I got to thinking about this and found myself out of my depth on the math:

The normal scenario presented is that a lesser rocket lifts a payload to the rotovator and the rotovator then hauls that payload to orbit. However, lets try a different approach:

A Falcon 9 upper stage approaches the rotovator but couples late, not getting the maximum benefit. It does not detach its payload, the whole rocket attaches. As the rotovator turns it reaches orbit and the payload is detached from the rocket but the rocket remains attached and continues on up, only detaching at the top when it's going as slow as possible.

The rotovator lifted the rocket + payload for less than its full run and then slowed the rocket without payload as much as possible. Choose the attachment point correctly and the energy balances but I'm not sure about the vectors. Am I missing something or would this provide a basically free boost to any rocket that was in the right place?

(And as a bonus this might make recovery of that upper stage viable.)


1 Answer 1


There is no free lunch but there is a discounted lunch if you are willing to take the risks. If you are using a rotovator to boost to a lower orbit then the rotovator will be boosted into a higher one and vice versa. The rotovator then needs to have some sort of propulsion system to move back down to the a lower orbit to be used again. If the rotovator had an electric propulsion system then it could make the transfer back more efficiently than a spacecraft using a chemical propulsion system. This is where the potential cost savings come in. A rotovator could deorbit multiple spacecraft for a lower fuel expense if you are willing to wait for it to travel from orbit to orbit which would take a greater amount of time and operator expenses. In addition to this detaching the tether/spacecraft at the wrong time/position would send the spacecraft and rotovator off into the wrong orbits. In the case of orbital reentry a seconds delay in detaching could be the difference between a safe reentry and burning up in the atmosphere.

A detailed systems analysis would need to be done to see if it would actually reduce costs. My gut says by using a rotovator you are adding a lot of complexity and risk for a small mass savings and that it probably is not worth the cost.

  • $\begingroup$ I don't see that you're addressing the scenario I'm looking at at all. The whole idea of using rotovators is as a momentum exchange, not to replace rockets on the craft with rockets on the tether. $\endgroup$ Commented Aug 9, 2016 at 18:53
  • 2
    $\begingroup$ Rocket engines are essentially momentum exchange devices which exchange momentum between the exhaust gasses and the spacecraft so it can move from one orbit to another. Rotovators are essentially the same only they store the linear momentum generated by a high efficiency rocket engine in the form of rotational momentum and release it all at once. Sorry I don’t have time to go into more detail than that right now. $\endgroup$
    – SpacePaulZ
    Commented Aug 9, 2016 at 19:03
  • $\begingroup$ I would expect that by the time we have the technology to make a rotovator we won't have the same problems to solve. $\endgroup$
    – GdD
    Commented Aug 10, 2016 at 11:21

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.