Does Mars contain the materials required to make plastic? If not, can they relatively easily be made, or an adequate substitute found?

  • 8
    $\begingroup$ Mars colonists will not be asking how to make things the same way they do on Earth, but rather how to achieve the same functionality with materials and energy sources more readily available on Mars. What we do on Earth is a function of what's cheapest. They will want to do the same on Mars, but that equation will be entirely different there. $\endgroup$
    – Mark Adler
    Oct 28 '13 at 18:03

Yes - for silicone plastics.

Mars does have plenty of silica (aka sand) so there are the basic materials to synthesize silicone - which can be used in place of most organic plastics. (Often performing better than conventional carbon-based plastics.)

Methane, chlorine, water, and carbon-dioxide all exist on the surface as well. It should be stated that this is speculative - the exact industrial processes to create plastics in any quantity given the Martian resources is far beyond me at this point. However, the raw elements seem to be available.


The key material to produce to make plastics is the production of ethylene, which is $C_2H_4$. According to The Case for Mars, this can be produced by the reaction $2CO+4H_2 \rightarrow C_2H_4+2H_2O$, with the presence of an Iron catalyst.. And the carbon monoxide comes from $6H_2+2CO_2 \rightarrow 2H_2O+2CO+4H_2$. Thus, the key to making plastics on Mars is Carbon Dioxide and Water. We know both materials exist on Mars, thus, it should be easy enough to make plastics, given the right catalysts.


Also, once a few polymer greenhouses have been set up, plants high in cellulose can be grown in them. The plants convert the carbon dioxide pumped into the pressurized greenhouses into cellulose, which in turn can be used for the producing plastics.

  • $\begingroup$ Interesting answer! Can you mention an example of cellulose being used to produce plastic? $\endgroup$
    – uhoh
    Apr 11 '18 at 11:20
  • 2
    $\begingroup$ @uhoh PHA (polyhydroxyalkanoate, which I am saying just to meet the character minimum) $\endgroup$
    – mattdm
    Apr 17 '18 at 18:00
  • $\begingroup$ @mattdm Thanks! Another way to increase character count is to include a link to Wikipedia like my next comment: $\endgroup$
    – uhoh
    Apr 18 '18 at 0:39
  • $\begingroup$ @mattdm PHA $\endgroup$
    – uhoh
    Apr 18 '18 at 0:40
  • $\begingroup$ I was gonna say Rayon, an early polymer formed from cellulose, but PHA is way more interesting. Thanks @mattdm! Any other options for plant/bacteria based plastics? $\endgroup$
    – wafflecat
    Apr 18 '18 at 9:15

As a follow-up to this answer, there is recent news in the catalytic conversion of methane to ethylene. From Phys.org's January 2018 article New, low cost alternative for ethylene production:

Scientists at Waseda University discovered a new OCM reaction mechanism occurring at a temperature as low as 150 degrees C. The novel catalytic reaction, which demonstrated both high yield and catalytic activity, was done in an electric field, and could provide a more cost-effective method of synthesizing ethylene in the future. The findings were published in the Journal of Physical Chemistry C on January 22, 2018.

"Performing OCM in an electric field dramatically lowered the reaction temperature, and we succeeded in efficiently synthesizing C2 hydrocarbon, including ethylene, from oxygen in the atmosphere with methane," says Shuhei Ogo, assistant professor of catalytic chemistry at Waseda.

The article links to Shuhei Ogo et al, Electron-Hopping Brings Lattice Strain and High Catalytic Activity in the Low-Temperature Oxidative Coupling of Methane in an Electric Field, The Journal of Physical Chemistry C (2018). DOI: 10.1021/acs.jpcc.7b08994

methane to ethylene catalytic conversion

above: Reaction mechanisms for the oxidative coupling of methane (OCM) over Ce2(WO4)3 catalysts at low temperatures in an electric field. From here. Credit: Waseda University

The earlier, Phys.org article A radical solution comes from mixing tools says:

The molten surface of a sodium-based material could assist the direct conversion of methane to useful building blocks.

Free radicals, molecules with an unpaired valence electron, such as the hydroxyl radical, play a crucial role in the industrially important conversion of natural gas, primarily methane, to ethylene: a vital organic compound that forms the building blocks of many commodities and polymers. To enhance this process, known as oxidative coupling, it is vital to develop selective catalysts.

The KAUST team—led by Kazuhiro Takanabe and his student Abdulaziz Khan—used in situ tools to measure the state of a catalyst under reaction conditions. They discovered that the active species in the catalytic reaction that exits on the molten surface of the sodium tungstate, a chemical necessary for the reaction, is sodium peroxide. This catalyst is unique in that instead of activating methane directly, it firsts activates water and then generates gaseous hydroxyl radicals.

The article links to Kazuhiro Takanabe et al. Integrated In Situ Characterization of a Molten Salt Catalyst Surface: Evidence of Sodium Peroxide and Hydroxyl Radical Formation, Angewandte Chemie International Edition (2017). DOI: 10.1002/anie.201704758


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.