2
$\begingroup$

The Seismic Experiment for Interior Structure probe onboard the Insight lander is meant to measure subtle seismic events on Martian surface.

In order to reduce the noise induced by wind, a protective cover is installed on top of it.

Is it essential for this cover to have a bellows design? Why would not a standard rigid cover do the job of wind protection?

Image for reference from Spaceflight 101's InSight Instrument Overview "Wind & Thermal Shield – Image: CNES/InSight Project" (courtesy @uhoh's answer).

InSight's Seismometer's wind cover

$\endgroup$

1 Answer 1

3
$\begingroup$
  1. The bellows are flexible, which means the cover will adjust itself to give a good seal on the uneven surface.
  2. the bellows can be easily folded up to take up minimum volume during flight, without needing a powered unfolding sequence which would add complexity and weight.
$\endgroup$
1
  • $\begingroup$ The "chainmail on a rock" picture above illustrates your point #1 nicely. $\endgroup$
    – DrSheldon
    Nov 27, 2018 at 18:49

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.