# Two-body problem VS Three-body problem Applications

The two-body problem deals with two bodies under certain assumptions while the restricted three-body problem deals with three bodies where one has a negligible mass (i.e. spacecraft or comet)

I was wondering what would be the applications of both and where would I use each?

And also, is the three-body problem theory only used to solve for periodic orbits around Lagrange points or are there any other implications?

• 2 body applies to an orbit inside the gravity well of a moonless planet. 3 body applies to a situation near a planet that has a single moon.
– Paul
Dec 22, 2019 at 16:18
• @Paul of course the orbits of a moon and a planet around their center of mass is also a 2 body problem, which is by the way reducible to a 1 body problem.
– uhoh
Dec 22, 2019 at 16:47

As mentioned already, the motion of two bodies can be reduced to a single body problem. In spaceflight, the assumption that your satellite is massless can basically always be made. The distinction is mostly whether you model the motion of your spacecraft as being attracted by one or two bodies. Of course, regardless of whether you are using a single central body or a three-body problem (CRTBP or general three-body), if you need more precision, perturbations are added to the main dynamics of the system.

The reason why you would choose one over the other is that for some desired trajectories, the dynamics are simply not present in the central body model. The simplest case where central body gravity is not sufficient is of course any kind of three-body orbit, such as halo or lissajous orbits around one of the libration points.

Now I arrive at your last point. Are three-body dynamics only used for these kinds of orbits? The answer is of course no. There are many more examples where the use of three-body dynamics is required.

One of the most important uses of three-body dynamics is patched 3-body trajectories. These are trajectories generated in the same way as the more commonly known patched conics trajectories but can utilize three-body dynamics to arrive at much more efficient trajectories. The basic idea is splitting up the trajectory into parts where different bodies are considered the main attractors. One such trajectory could be a transfer from LEO to the Sun-Earth L1 point, via the Earth-Moon L2 point. The method makes use of so-called stable and unstable manifolds. These manifolds are sets of trajectories leading respectively towards or away from the libration points.

For a trajectory to Sun-Earth L1 as described, the idea is to deliver the spacecraft from LEO to the stable manifold leading towards Earth-Moon L2, then enter the unstable manifold leading away from L2 in the other direction, stay on that manifold until it intersects with the stable manifold towards Sun-Earth L1, and then performing a manoeuvre to enter that stable manifold. At the time of the manoeuvre, the dynamics are switched from Earth-Moon three-body to Sun-Earth 3-body, much like you would switch in the patched conics approach once you enter the sphere of influence of another body.

Apart from these energy efficient transfers, the patched 3-body approach can also be used to calculate for example energy efficient tours of the Jovian system, where the dynamics are constantly switched between systems consisting of Jupiter and either of the Jovian moons you want to visit. See the image below for an example of one such visit.

Both images for the patched 3-body approach are taken from Connecting Orbits and Invariant Manifolds in the Spatial Three-Body Problem by Gomez et al.

And also, is the three-body problem theory only used to solve for periodic orbits around Lagrange points or are there any other implications?

The CR3BP or CRTBP or Circular Restricted Three Body Problem assumes circular orbits of two massive bodies around their common center of mass, and a third massless body that responds to their gravity fields. It is usually solved in a coordinate system that rotates with the massive pair, so animations often show the two fixed.

For the third body, some trajectories can be closed and periodic but those are relatively rare. You can still use CR3BP techniques to analyze chaotic orbits like those of minimoons which dance around for a while in the Earth-Moon system, then drift off.

There are a large number of closed and periodic orbits in the CR3BP, I've added one image below but you can read more about it in this answer. I don't know how many possible orbits there are in total, the question How many kinds of closed or periodic orbits are there in the circular restricted three-body problem? has not yet been answered.

Some of those orbits are stable against small perturbations within the CR3BP constraints, but most are unstable. What do stable and unstable mean? In this context an orbit is stable if you can give the object a tiny nudge and it will continue in a slightly different but also closed and periodic orbit. If it is an unstable orbit, then the tiniest of nudges will cause to diverge or bifurcate from the original orbit and after a short time go off and do something completely different.

In the question How to best think of the State Transition Matrix, and how to use it to find periodic Halo orbits? you can see how CR3BP math can be used to generate a few halo orbits, its a very simple example.

• I assume that the chaotic orbits are very rare and don't occur as often so this technique is mainly used for periodic orbit analysis.
– John
Dec 22, 2019 at 22:05
• @Adham it's the other way around. If you generated a million random initial trajectories (different starting positions, speeds, and directions) I think nearly all of them would be unstable, many of them chaotic, and few or none closed and periodic. That's not a hard experiment to do; I'll see if I can add it later. However the technique might still be mainly used to try to find those rare closed and periodic orbits!
– uhoh
Dec 22, 2019 at 23:36
• Oh alright! It basically checks for the existence of the rare closed and periodic orbits! I would really appreciate it if you can add the experiment !!!
– John
Dec 22, 2019 at 23:38