# Can you make out the shape of the ISS with the unaided eye as it passes overhead?

Someone claimed to me that they could see the actual shape of the ISS as it passed overhead without use of any optical device. I would think this isn't possible since it is only about 100 meters wide but over 370 km in altitude. I read through this question already but I wanted to know if it was possible to discern the solar arrays or general shape of the station (assuming you're in a decently remote area).

Edit: This was claimed to have been observed recently, so it wasn't a case of a shuttle rendezvous with the station.

• It's perfectly possible to see the shape with a telescope, though. – Eric Duminil Nov 27 '17 at 7:50

Having observed the International Space Station numerous times passing over the early night skies, on a clear night and when my eyes are rested (I stare a lot at monitors like I'd guess most of us here) having normal visual acuity (20/20 vision), I can assure you that your friend's claims are quite impossible even for an experienced amateur astronomer with many tricks up his sleeves, such as knowing how to use averted vision and observing the station when it barely reflects any light (usually farthest East during its early night sky when it would most likely start entering the Earth's shadow), to reduce atmospheric diffraction of high-contrast close bright sources on a dark background reducing into a single point of light:

Airy diffraction patterns generated by light from two points passing through a circular aperture, such as
the pupil of the eye. Points far apart (top) or meeting the Rayleigh criterion (middle) can be distinguished.
Points closer than the Rayleigh criterion (bottom) are difficult to distinguish. Image and quote: Wikipedia

But before we even consider what other limitations to discerning features of a distant object might there be, let's first see what's still reasonably plausible for a human eye. So the question is, what's the human eye's resolution and the minimum spacing between two bright objects at the ISS orbital altitude (370 km or 230 mi)?

According to Human Photoreceptor Topography, Curcio et al., 1990 (PDF) that lists several sources as well as own measurements of the spatial density of cones and rods in whole-mounted human retinas, the greatest cone density recorded was 324,100 cones/mm2. That gives us acuity (or row-to-row spacing we need to discern at least two individual features) of 86.3 cycles/°. So for our best case, with a great eye, neglecting any atmospheric effects, the ISS right above us when it's closest, and optimal contrast with the background sky, we get minimum separation of objects of 74.83 m. If there was no air between the observer and the station!

So while 74.83 m seems just about right with the ISS truss length at 109 m (and solar panel arrays stretch a bit further than its truss, so their two sides' center spots would indeed be separated about that much), we shouldn't forget that there is about as much matter in between the observer and the subject that the observer is looking through, as if he was looking through roughly 10 meters of water. So indeed, the two sides of the ISS would be quite impossible to discern, even from a high altitude observation point, no air or light pollution, and extremely clear night.

It is however still possible that your friend isn't making anything up, saw an iridium flare of two closely following satellites flying in formation, and confused them for the ISS. Those are not that rare, I've seen two such double iridium flares just last month, and I can assure you that I was not that bored to constantly look at the night skies. Those double (or sometimes triple, quadruple,...) flares of satellites flying in formation can look something like this (long exposure taken with a zoom camera):

Inexperienced observer could easily confuse these for a single object, since they appear to move as if they were connected to each other, like the ISS solar panels are via its truss. They move exactly like you'd expect of Low Earth Orbit satellites (like the ISS) to move, which is of course because they are. And they can be as bright as the ISS. But they do keep a bit larger distance to each other than the ISS's roughly 100 yards. Actually, there's a lot less space between the ISS solar panel arrays, since that's approximately its total length.

• I'm wondering if it could have been an instance where something like the Shuttle was approaching the ISS too. – PearsonArtPhoto Apr 20 '14 at 12:56
• @PearsonArtPhoto It is a possibility, if it happened years ago, but the solar panels of today's resupply vehicles and Soyuz are really small compared to the ISS ones and they would have to be on final approach for them to appear as if they were two parts of the ISS. E.g. for yesterday, here's the ISS: flickr.com/photos/11113385@N02/13940060613/in/… and the Dragon about 3 minutes behind it: flickr.com/photos/11113385@N02/13916922912/in/… As the source says, the Dragon resupply vehicle was faint but still visible to the naked eye. – TildalWave Apr 20 '14 at 13:04
• The Shuttle could be seen, but I agree, everything else it just too dim to have much of a chance. Remember that the Shuttle stayed near the ISS for about 6 hours before docking, so... – PearsonArtPhoto Apr 20 '14 at 13:05
• That said, even with \$20 Walmart binoculars you can see the shape of it. – Skyler Oct 3 '17 at 18:48
• As mentioned by Skyler, it's perfectly possible to see the shape of ISS with binoculars or a telescope. It's an incredible sight, and it's not that hard to do with a dobsonian. I could even distinguish the 16 photovoltaics arrays and the distinct modules in the middle. More info here. – Eric Duminil Nov 27 '17 at 7:50

Human vision has an unaided resolution (typically) of around 0° 4'.

The ISS orbits at 370 km. It is approximately 73 m wide, 109m m long.

3.7e5 * sin(4') ≅ 430.5

Each "pixel" is roughly 430 m. That the station is visible at all is a simple matter of brightness.

To get a visible shape reliably would require a roughly 10x scope, at which point the image would be between 1 x 2 pixels and 3x3 pixels, depending upon where exactly it falls - sufficient, over time, to infer shape.

Even at the fovea, where peak individuals have been noted to have as narrow a discrimination as low as 0° 0' 21" of arc resolution, the peak resolution would be about 21 m per pixel. Still only about 4x5 pixels worth, at the very peak.

Note also: human shape discrimination isn't a continuous field of uniform resolution, but a variable field ranging from about (typically) a ≤1° zone of 1' resolution through an outer band of ≥1° per cone at the very edges. To make out the station at peak is barely doable, but only if looking right at it and then only while it remains within the narrow view of the central fovea.

• Do you have a source for your human vision resolution figure? – RossV Apr 21 '14 at 13:05
• I've "known" for years that typical good human eyes have an angular resolution of about 1 minute of arc, or 1/60 of a degree. This is surprisingly hard to find an official source for, though! – dotancohen Apr 21 '14 at 15:38
• I verified my recollected 0° 4' via wikipedia, and yes, I am aware that peak human vision can get (in the sweet spot) down to as fine as 0° 1' in exceptional individuals. That's still not quite enough to get to the level of resolving to more than 6-9 pixels. – aramis Apr 22 '14 at 19:57

In addition to the other answers: you could actually test this yourself.

Build or print a 5 cm model of the station. Make sure it's white. The scale would be 5/10900 = 1:2180

If you assume an average distance of about 370km, that would scale down to roughly 170m.

• Find a straight road with no traffic. Check with any map that it's long enough.
• Take a bicycle, measure the circumference of the tyre and mark one spoke. Calculate how many turns you need to get to 170 meters.

• Take black cardboard on a sunny day, put the model in front of it and then slowly move away and count revolutions. A good gps will work, too but it's less fun.

While this won't take atmospheric effects into account, it still should be somewhat accurate.

• I like your answer! Have you ever tried this? It sounds like you might have. If you can describe what you saw, that could count toward an answer to the OP's actual question. – uhoh Mar 21 '18 at 8:45
• @uhoh I have some knowledge when it comes to basic astronomy and mirror making but my eyes are not up to the challenge anymore. It's also much more fun to do it oneself than to just read it. I might do similar things with a telescope to measure distances.in the future. – Haunt_House Mar 21 '18 at 8:58
• OK well I'm going to try it then! :-) I don't have a 3D printer, but I do have a laptop with a copy of Blender! Can you recommend a source for a 3D model that can import like this and then display on a black background? – uhoh Mar 21 '18 at 9:08
• @uhoh While I like it a lot when people bring up Blender, I can assure you, a few pieces of white cardboard and a small roll of paper will do. You can even do preliminary tests with any household item that has decent contrast. – Haunt_House Mar 21 '18 at 9:12
• Also: Unless you are certain to be alone or have friend who's guarding the laptop, putting considerable space between you and your valuables can backfire. A cigarette ISS with aluminum foil solar panels will not be missed that dearly. – Haunt_House Mar 21 '18 at 9:35